Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

Fluorescent macrocyclic chemosensor for Zn(II) detection at alkaline pH values

ABSTRACT

The new macrocyclic ligand L (28,29-dimethoxy-27-oxa-8,11,14,17,25,26-hexaazatetracyclo[22.2.1.1(2,6).1(19,23)]nonacosa-2,4,6(28),19,21,23(29),24,26(1)-octaene) has been synthesised. It contains a tetramine chain and the 2,5-bis(2-methoxy-3-metyl-phenyl)-1,3,4-oxadiazole (PPD-OMe) chromophore, acting as coordinating and sensing units, respectively.

The fluorescent emission of L depends on the pH being highly fluorescent at pH = 2 and not emitting from pH >10. The studies highlighted that L is a PET mediated emitting chemosensor, being the PET effect regulated by the degree of the tetraamine protonation.

L coordinates metal ions (Cu(II), Zn(II) and Cd(II)) in water giving rise to an OFF-ON fluorescent response for the presence of Zn(II) ion thus signalling its presence in the medium. This response is particularly notable at pH = 9 allowing to extend the Zn(II) sensing also in the alkaline pH field.     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.     

Sonochemical approach for synthesis of zinc oxide-poly methyl methacrylate hybrid nanoparticles and its application in corrosion inhibition

Hybrid nanoparticles (HNPs) with zinc oxide and polymethyl metha acrylate (inorganic/ polymer) were synthesized through the exploitation of ultrasound approach. The synthesized HNPs were further characterized employing transmission electron microscopy and x-ray diffraction. ZnO-PMMA based HNPs exhibit excellent protection properties to mild steel from corrosion when gets exposed to acidic condition. Electrochemical impendence spectroscopy (EIS) analysis was accomplished to evaluate the corrosion inhibition performance of MS panel coated with 2 wt% or 4 wt% of HNPs and its comparison with bare panel and that of loaded with only standard epoxy coating., Tafel plot and Nyquist plot analysis depicted that the corrosion current density (I_corr) decreases from 16.7 A/m² for bare material to 0.103 A/m² for 4% coating of HNPs. Applied potential (E_corr) values shifted from negative to positive side. These results were further supported by qualitative analysis. The images taken over a period of time indicated the increase in lifetime of MS panel from 2 to 3 days for bare panel to 10 days for HNPs coated panel, showing that ZnO-PMMA HNPs have potential application in metal protection from corrosion by forming a passive layer.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Transition‐Metal‐Free Trifluoromethylthiolation of N‐Heteroarenes

A general and efficient methodology for the direct transition metal free trifluoromethylthiolation of a broad range of biologically relevant N‐heteroarenes is reported employing abundant sodium chloride as the catalyst. This method is operationally simple, exhibits high functional group tolerance, and does not require protecting groups.     

Leaching of zinc and germanium from zinc oxide dust in sulfuric acid-ozone media

A new process of leaching zinc oxide dust by ozone oxidation in a sulfuric acid system was studied. The main factors affecting the leaching rate, such as ozone time, leaching temperature, initial acidity, leaching time, and liquid/solid mass ratio, were comprehensively investigated. The results show that leaching efficiency depends on all the above factors. The optimum conditions for leaching Zn and Ge from zinc oxide dust are as follows: ozone time 10 min, leaching temperature 90 ℃, initial acidity 160 g/L, leaching time 60 min, and liquid/solid mass ratio 7:1. Under the optimum conditions, the leaching rates of Zn and Ge are 95.79% and 93.65%, respectively. The leaching rates of zinc and germanium in the ozone leaching are 4.05% and 10.49% higher than those of the atmospheric leaching, respectively. Therefore, it is determined that ozone in solution plays a key role in rapidly oxidizing sulfide and releasing encapsulated germanium. Sulfuric acid-ozone media can efficiently extract Zn and Ge from zinc oxide dust.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

Crystal Structure of LiRh-type IrZn Determined by Powder X-ray and Selected Area Electron Diffraction

The LiRh-type crystal structure of the equiatomic intermetallic compound IrZn turns out to be a competitor to the otherwise energetically favored CsCl-type structures of congeneric transition metal zinc phases, thus enlightening the structural impact of element-specific factors beyond the Hume-Rothery concept.